11
1
）
Turn the wheel to lift the needle to the highest
position.
2
）
Pull the about 5cm thread from the shuttle core
and put them into the bobbin case.
3
）
Thread in the order of the number. Pull thread
form the opening. Pulling the bottom thread will
have the shuttle core to rotate in the direction of
arrow.
4
）
Draw the handle
○
,1
5
）
At this moment, put thread from the lower shield
handle and insert it into the inner shuttle shaft
on bobbin case.
6
）
Close the handle on the bobbin case
Usage Method of Thread Hole on Bobbin Case:
1
）
Hole A is used at the sewing beyond the 2-points
zigzag sewing and scallop zigzag sewing.
2
）
Hole B is used at the 2-points zigzag sewing and
scallop zigzag sewing mainly.
[Note] At Hole B, after machine cuts the long fiber thin thread, the first few stitches may be
hard to get knotted. Therefore, please use other thread hole or start sewing from right
2.5 Threading Method of Upper Thread
In order to avoid the personal injury due to the sudden move, user
should perform the operation after the motor stops completely.
www.garudan.cz