Anita Garudan GZ-539 Series Скачать руководство пользователя страница 67

Страница: 67 / 155

Press

and

to adjust the needle number. At

same time, the icon in pattern display area will move along

with the setting.

Display and Setting of

Swing Width

Display the needle swing width of the current stitch. That

value stands for the X absolute coordinate.

Press

to adjust the value, the range of it is

-5.0~5.0mm.

Display and Setting of

Feeding Amount

Display the feeding amount of the current stitch. That value

stands for the Y relevant coordinates

Press

to adjust the value, the range of it is

-5.0~5.0mm

。

Insert a Stitch

Insert a stitch at the current stitch. The inserted stitch has

the same swing width as the current stitch. And system will

add 1.0mm to the feeding amount.

[Note]: when the total stitch number is 500, this

operation is unavailable.

Delete a Stitch

Delete the needle entry point of current stitch, and the

following stitches will move forwards.

[Note]: when the total stitch number is 1, this operation

is unavailable.

End Mark

Input the end mark. Once you input the end mark at the

current stitch, the stitches after the current stitch will

become invalid.

Cancel

Cancel the current operation and return to the previous level

Enter

Confirm the operation and save the editing result. The

system will enter the interface for setting the editing pattern

Mirror

Press this button to select the mirror method for the pattern

：

Make the mirror along X axis

：

Make the mirror along Y axis

3.8 Saved Pattern

After the registration, the basic patterns or the customized patterns will become the saved pattern.

User can only register the pattern in free sewing mode and overlapped sewing mode.

After the registration: user can not edit the data of the saved pattern from the customized pattern,

www.garudan.cz

Содержание Garudan GZ-539 Series




























































































































































Результаты поиска

Содержание Garudan GZ-539 Series

Отзывы:

Anita Garudan GZ-539 Series, Руководство пользователя, Страница: 67 / 155

Результаты поиска

Содержание Garudan GZ-539 Series

Отзывы: