Anita Garudan GZ-539 Series, Руководство пользователя, Страница: 115 / 155

105
2
、
Select Parameter for Encryption
：
As shown in picture, user can
select one or many parameters for
encryption. (Here, we select “Presser
and Pedal”.)
：
Selected
：
Unselected
After selecting the parameter for
encryption, user can press .
From then on, user has to input
password when setting the parameter
that was encrypted.
For changing password, please
press .
[Note] User has to input password at
having access to the Special
Parameter in each time.
3
、
Change Password
In the interface of setting new
password, press
,
&
in order
and input the current password, new
password, confirmation respectively. At
last press .
[Note]: The original password is the
manufacturer ID. After setting the
password, the
“
Current Password
”
is
the password set at last time
3.13.6 Counter

The counter contains the trimming counter and bottom thread counter. User can shift the type
of counter via “Counter”
→
“Counter Display”.

At trimming in each time, the value of trimming counter will increase. When it reaches the
www.garudan.cz