13
3 Operations
3.1 Basic Operations
1
、
Turn on Power Switch
When the needle rod is not at the upper position, the system will give
“Needle Up Posi. Error”. At this moment, user has to turn the wheel to move the needle rod to the
upper position.
2
、
Select the Pattern
Select the pattern for sewing at current interface.
3
、
Start Sewing
The pedal has four levels.
1
）
Stepping front part of pedal slightly is for slow speed
sewing
○
,B
2
）
Stepping front part of pedal again is for high speed
sewing
.
○
,A
3
）
Step the pedal slightly and release, the machine will
stop
(When the auto reverse sewing switch is set,
the machine will start high speed sewing after the reverse
sewing).
○
,C
4
）
Stepping the rear part of pedal is to lift the presser
(The needle stops at upper or down position)
○
,D,
www.garudan.cz