Anita Garudan GZ-539 Series, Руководство пользователя, Страница: 103 / 155

93
P2-6* Reverse Sewing
Total Pressure
Output Time
Set the total pressure
control time of the
reverse solenoid
ms 1 50~250 100 Input
P2-7* Reverse Sewing
Output Duty
Cycle
Set the current when the
reverse solenoid is
holding
1 0~100 40 Input
*The parameters with mark “*” should be changed under the guide of the professional
technicians.
3
、
Main-shaft and Speed:
Code Brief Description Unit Step
Length
Range Default
Val ue
Type
P3-0 Soft Start Stitch
Number
Set the stitch number of soft
start at sewing
Stitch 1 0~9 3 Input
P3-1* Soft Start Speed Set the speed at soft start rpm 50 150~5000 1200 Input
P3-2* Reverse Sewing
Speed
Set the Max speed at reverse
sewing
rpm 50 150~3000 1500 Input
P3-3 Min Speed The Min Speed rpm 10 20~400 200 Input
P3-4 Sewing Speed at
One Time
Set the speed at an automatic
sewing
rpm 50 200~5000 3000 Input
P3-5* Down Needle
Stop Angle
Down Needle Stop Angle Degree 10 120~200 160 Input
P3-6 Needle
Conversion at
Trimming
Set the function for converting
the needle after trimming
0:OFF: No
1:ON:Yes
0 Selecti
on
P3-7 Conversion
Needle Angle
Set the angle for converting the
needle
Degree 1 0~45 20 Input
P3-8* Main shaft angle
adjustment
Adjust the main shaft angle. It
is only effective for the
integrated motor.
Degree 1 -30~6 0 Input
P3-9* Main motor
Selection
Select the type of main shaft
motor
0
：
Normal
Motor
1
：
Integrated
motor
1
Selecti
on
*The parameters with mark “*” should be changed under the guide of the professional
technicians.
4
、
Thread-trimming
：
Code Brief Description Unit Step Range Default Type
www.garudan.cz