Anetic Aid QA3 21110, Инструкция по эксплуатации

Страница: 38 / 40

Quick Debugging Guide for DRIVE Assist & Powered Functions
Document No. 992012. Issue 19 – 24.10.22 Page 34
50. Quick Debugging Guide for DRIVE Assist
In case your
DRIVE
assist system fails to perform as expected, follow these steps;
50.1. Check if the system is switched on; the system switches off automatically after 30
minutes of inactivity.
50.2. Check if the DRIVE handles are inactive, indicated by 3 rapid pulses of the system
status indicator; the
DRIVE
handles automatically deactivate after 3 minutes of
inactivity. Reactivate the
DRIVE
handles by a short press on the ON/OFF Button,
the system status indicator will return to solid green.
50.3. Switch the system off and on again. Let the system restart and the DRIVE handles
recalibrate; check the system operates normally.
51. Quick Debugging Guide for Powered Functions
In case your Powered functions fail to perform as expected, follow these steps;
51.1. Check if the system is switched on; the system switches off automatically after 30
minutes of inactivity.
51.2. Switch the system off and on again; let the system restart and check the system
operates normally.
51.3. Are all the user interface LEDs flashing? If so, the emergency stop button is
depressed. Reset the emergency stop button, see Section 35.