Anetic Aid QA3 21110, Инструкция по эксплуатации

Страница: 37 / 40

Product Accessories
Document No. 992012. Issue 19 – 24.10.22 Page 33
The monitor shelf frame can be fitted with two transfusion poles (catalogue no. 21152-
B1) as a factory fitted option. The height of the transfusion pole is adjusted by
releasing the thumb lock (D), lifting the pole to the desired height, and retightening
the thumb lock. Each transfusion pole is fitted with two spring-loaded hooks (E) that
are designed to return to their original upright position when not in use. Swivel one or
both hooks outwards to hang the IV bags, as illustrated in Fig. 8b.
Fig’s. 20 & 21 illustrate how the removable refreshment tray is set up and used. The
refreshment tray is removed from the monitor shelf frame by depressing the yellow
release button (F). When the tray has been removed both support legs (G) can be
hinged open and the refreshment tray placed on to the stretcher side rails, orientated
so that the tall lip of the tray is furthest away from the patient; as illustrated in Fig. 21.
CAUTION: When using the refreshment tray observe the following;

Ensure the tray is orientated correctly; the tall lip of the tray is furthest
away from the patient.

Do not tilt the patient platform into a Trendelenburg position.

Do not lower either of the side rails.
48. Using an Optional Loose Transfusion Pole (catalogue no. 21161)
NOTE:
A loose transfusion pole cannot be used with the stretcher if fold-away
pushing handles are fitted to the foot end.
CAUTION: Using the loose transfusion pole to either push or pull the stretcher
may cause permanent damage to the transfusion pole.
A loose transfusion pole can be inserted into either of the location sockets at the foot
end of the stretcher; see Fig. 18 (B). For instructions on how to use the pole see section
15, ‘Using the Transfusion Pole’.
49. Using the Optional Storage Box (catalogue no. 21191)
As illustrated in Fig. 22, the storage box is quickly, and simply, located onto the support
arms (A). The support arms are slid out (B), and the storage box is placed on to the arms
(C).