Anetic Aid QA3 21110, Инструкция по эксплуатации

Страница: 20 / 40

Manual Functions
Document No. 992012. Issue 19 – 24.10.22 Page 16
18. Using the Dual-articulating Head Positioner (QA3 Ophthalmic Trolley only)
The stretcher is designed to allow for different head section options to be fitted; the
image below shows the ‘Dual-articulating Head Positioner’ (see Section 45. Product
Accessories, for optional head sections). To remove the head section, lift the release
handle Fig. 10 (C), then lower and remove the head section from the support bracket.
The head positioner articulates on 2 axes, (A) and (B). Pulling on lever (A) allows the
head piece of the positioner to articulate on axis (A). Pulling on lever (B) allows the neck
piece to articulate on axis (B); see Fig. 10. Using the levers in combination the head
positioner can be elevated up and in towards the body section mattress as shown in Fig.
11a and 11b.e
NOTE: The maximum weight limit for the dual-articulating head section is 25kg.
CAUTION: When releasing the levers it is important to support the weight
of the patients head. Failure to do so could result in injury to the patient.
19. Using the Flexible Oxygen Delivery Bar Clamp
The Flexible Oxygen Delivery Bar Clamp, Fig. 12 (A), is used to secure the Flexible
Oxygen Delivery Bar and Drape Screen (B) to either siderail. The Flexible Oxygen
Delivery Bar and Drape Screen is intended to support the patient drape, and deliver a
continuous flow of oxygen beneath the drape when connect to an oxygen supply.
The clamp is placed into the elliptical opening of the siderail and rotated so that flat
plate sits against the siderail moulding, as illustrated below. The oxygen delivery bar is
inserted into the opening of the clamp (C), and secured with the hand wheel (D); the
height of the oxygen delivery bar can be adjusted to suit. The oxygen supply is
connected to the inlet nozzle (E).