andrews MAXXflo EVO CWH 30/201, Руководство по установке и обслуживанию

Страница: 71 / 76

Maintenance 71 MAXXfl o EVO
6.4 RECOMMENDED SPARES REQUIREMENTS
Emergency parts recommended to be kept on site
The following components are recommended to ensure fast recovery times in the event of a heater compo-
nent failure. An engineer attending a breakdown on site can immediately use the contents of the 1st aid kit
to make a rapid repair. Once a component is used it must be replaced at the earliest possible opportunity to
ensure rapid breakdown recovery abilities are retained.
Essential First Aid kit contents to maintain the heat engine in operation
• 1 x Gas valve
• 1 x Fan
• 1 x LMS14 PCB (slave default but master selectable)
• 1 x Q1 Pump
• 1 x Spark generator
• 1 x Ionisation ele gasket
• 1 x Spark ele gasket
• 1 x H3 Pressure sensor
• 1 x 10kΩ B2 fl ow or B7 return temperature sensor
• 1 x 10kΩ B3 upper or B31 lower tank temp sensor
• 1 x 20kΩ B8 Flue temp sensor