Anderson ROUND and SQUARE BALE WRAPPER HYBRID, Руководство оператора

Страница: 35 / 112

33
Figure 9.3 Speed control lever
9. Press down the pusher start pedal again to make the pusher complete 2-3 more pushing
cycles. Keep the unloading posts in place until the second post has traveled almost as far
as it can go and the last bale has been pushed to the end of the front gate.
10. Once the bale row has been completed, remove the 2 unloading posts and the plate. Place
the unloading posts back in their storage area. Put the ring pin back in place at the rear of
the pusher plate.
Variation for Finishing a Continuous Bale Row
Before inserting the unloading posts, certain users use one or several bales that will not be
wrapped to push their continuous bale row so as to be certain to completely free their machine
at the end of the bale row without risking damage to the bale row.
Checking the Bale Row
Once the bale row is finished, check that the entire length of the bale row is fully sealed in
plastic. If necessary, seal the air holes with airtight tape so that fermentation can quickly begin.
Do not use masking tape or duct tape.
Identify your continuous bale rows by field and date them. You can also make a map or a
written description of your storage site to make management easier.
Regularly examine your bale rows and repair any holes or cracks that you see.