Anderson ROUND and SQUARE BALE WRAPPER HYBRID, Руководство оператора

Страница: 29 / 112

27
8 Adjustment Procedures
Factory-Made Automatic System: In Case of Problem Check Adjustments
Follow steps (8.1)-(8.2)-(8.3)-(8.4)-(8.5). Refer to the numbers in the illustrations.
Figure 8.1 Start pedal
8.1

Press down on the start pedal located at the back of the bale wrapper, right next to the
Honda gasoline engine (Figure 8.1 #1). (Do not start the Honda engine.)
Figure 8.2 Hoop lever
8.2

Push the lever (Figure 8.2 #2) toward the rear of the bale wrapper to make the slide
come out of the valve (Figure 8.2 #8), then push the lever toward the front of the bale
wrapper until the plate (Figure 8.2 #9) very lightly touches the end of the slot in the part
(Figure 8.2 #3) without moving it.
1
3
2
8
9