Anderson ROUND and SQUARE BALE WRAPPER HYBRID, Руководство оператора

Страница: 34 / 112

32
9 How to Finish a Continuous Bale Row
Steps
1. Wrap the last bale of the continuous bale row in a plastic bag and load it onto the bale
wrapper. Do not forget to release the hydraulic brake
2. Stop the engine (Do not stay or walk on the machine when the engine is
running).
3. Remove the ring pin from the pusher plate.
4. Move the part 10 », (Figure 8.5) as front as possible.
5. Take out the 2 unloading posts, located on the left side of the rear chassis. Take the
unloading post with a round rod at the end and place it in the square axle of the pusher
plate with the square holes facing downward. Push on the unloading post to manually
move the pusher plate forward (Figure 9.1).
Figure 9.1 Unloading post
6.
Insert the second unloading post inside the first and continue to manually move the
pusher plate forward until it reaches the last bale.
7. By pushing on the start pedal located at the rear of the bale wrapper, you will start a
pushing cycle. You must manually hold the unloading post forward while the pusher is
moving backward (Figure 9.2).
Figure 9.2 Pusher start pedal
8.
As soon as the last bale has passed through the hoop and is fully wrapped, cut the 2
sheets of plastic film and place the speed control lever at 0. Attach the 2 free ends of the
plastic film to the plastic holder (Figure 9.3).