AD-4430B
- 15 -
5.1.4.
Clearing The Tare Value And Zero Operation
To clear the tare value and zero operation, hold the (TARE) key and turn on the module. Or:
In off mode, hold the (TARE) key and press the
key.
5.1.5.
Customizing The Function Of the F Key
Assigns a function to the
key from the functions of
(
key function) below :
0: None
1: Manual print command
2: Hold
3: Alternate switch
4: Momentary switch
5: Display selection
6: Clear the tare weight
7: Clear the zero value
( Clear the zero value )
:
Enable or disable clearing the zero value.
0: Disable
1: Enable
Alternate switch and momentary switch
By assigning these switches to the
key, the ON/OFF status of the
key can be
transmitted to the master station. This is useful when building a network or performing
maintenance. The function of the x display can be specified by the
key and can be
monitored by the linked memory. These switches work as follows :
Alternate switch
When pressing and releasing the switch once, the state of the switch is maintained.
Press the switch again to turn off or on.
Momentary switch
Only while the switch is being pressed, the switch is ON. When it is released, it is OFF.
