Analytik Jena qTOWER3 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 43

background image

Specification

42

10.3

Standards and directives

The qTOWER³ auto meets the requirements of the following safety standards:



EN 61010-1:2010



EN 61010-2-010:2014

For the safety class and protection type of the device, see “Technical data” on page 17ff.
The qTOWER³ auto meets the applicable requirements of EMC directive 2014/30/EU.
The device has been tested for radio interference elimination and interference immunity
and meets the requirements of the following standards:



EN 61326-1:2013 Immunity



EN 61326-1:2013 Emissions (Class A)

The qTOWER³ auto has been tested for environmental compatibility and meets the re-

quirements of directive 2011/65/EU.
The conditions of use and transport – in accordance with the requirements of EN
61010-1:2010 – refer to the following standards:



DIN EN 60068-2-1, Ab, 2008-01



DIN EN 60068-2-2, Bb, 2008-01



DIN EN 60068-2-78, Cab, 2014-02



DIN EN 60068-2-6, Fc, 2008-10



DIN EN 60068-2-64, Fh, 2009-04



DIN EN 60068-2-27, Ea, 2010-02



DIN EN 22248



DIN EN 22206

The qTOWER³ auto was built and tested in compliance with the standards given. The re-

quirements of the EU directives 2014/35/EU and 2014/30/EU were also met. Custom-

ers receive devices that are in a sound condition with regard to technical safety. To
maintain this condition and to ensure safe operation, the operator must observe the

safety and operating instructions contained in this operating manual.
The device meets the requirements of Part 15 of the FCC regulations (Federal Commu-
nications Commission Advisory). The following two requirements pertain to operation:



The device does not cause interference.



The device is resistant to interference, including such interference as is liable to
cause malfunctions.

The device meets the requirements of Part 18 of the FCC regulations.
The device meets the requirements of Canadian industry standard ICES-001 (Interfer-
ence-Causing Equipment Standard).
For accessories delivered with the device and system components from other manufac-

turers, the information in the respective operating manuals have priority.

Device safety

EMC compatibility

Environmental compati-
bility

EU directives

Directives for the U.S.A.

Directives for Canada

«
...
40
41
42
43
»

Содержание qTOWER3












































Отзывы:

Нет отзывов

Похожие инструкции для qTOWER3

Бренд: Laica Страницы: 4

Бренд: Walker Bay Страницы: 8

Бренд: KaVo Страницы: 13

Бренд: vc999 Страницы: 52

Бренд: DB Industries Страницы: 60

Бренд: vc999 Страницы: 55

Бренд: Salsbury Industries Страницы: 4

Бренд: Nitecore Страницы: 4

Бренд: ICP DAS USA Страницы: 45

Бренд: IDEAL Networks Страницы: 10

Бренд: JBL Страницы: 17

mocon AQUATRAN 3/38

Бренд: Ametek Страницы: 85

Wallach UltraFreeze

Бренд: Cooper Surgical Страницы: 4

Бренд: E-FLOR Страницы: 124

Бренд: Elenco Electronics Страницы: 12

Бренд: GRAVITY Страницы: 2

Бренд: Taurus Страницы: 38

Бренд: Phonocar Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды