Installation and commissioning
26
2.
Connect the PC and the qTOWER³ auto using the USB cable included in the scope of
delivery.
Alternatively, the qTOWER auto can be controlled via Ethernet. Establish the LAN con-
nection to the power module for this purpose.
Fig. 12 Connections at rear
3.
Connect the power cable and the two data connection cables both at the
qTOWER³ auto and the power module (Fig. 11). The connection cables (circular con-
nectors) are fitted with a push-pull locking mechanism for this purpose, i.e. the con-
nector automatically locks into place; before removing it, first slide back the outer
sleeve.
ATTENTION
Remove the transport lock during commissioning.
4.
Switch on the qTOWER
3
auto power module (see “Switching on the qTOWER³ auto”
page 27).
