Layout and function
18
3.1.2
qTOWER
3
auto power module
The qTOWER
3
auto power module is used to provide the automated real-time PCR
qTOWER³ auto thermal cycler with power. The external solution allows for flexibility
with regards to installation or integration in automation systems.
The operating status (on/off) is indicated by the status LED on the front of the device.
The connections for Data 1, Data 2 and Power are also located here.
Fig. 5
Power module (front view)
1 Status LED (indicates whether the device is switched on or off)
2 Power connection
3 Data 1 connection (lid heating – communication lines)
4 Data 2 connection (for connecting the sensors of the thermal block)
A mains connection socket, the fuse compartment and the power switch are located at
the back of the qTOWER³ auto, in addition to the service connection.
Fig. 6 Power module (rear view)
1 Type plate
2 Warning note
3 Service connection
4 Ethernet port
5 On/Off switch
6 Fuse compartment
7 Mains connection socket
