Anaheim Automation DPD75601, Руководство пользователя

Страница: 40 / 49

40
#L010155 July 2004
^ - Number of outputs during output on the fly ^ - Number of outputs during output on the fly
^ - Number of outputs during output on the fly ^ - Number of outputs during output on the fly ^ - Number of outputs during output on the fly
Format: ^[value]
Description: This command sets the number of times output 1 will turn on during an output on
the fly move. This command is used in conjunction with the output on the fly en-
abled “(“ command.
Range: 0 - 255
{ - Analog position lower limit { - Analog position lower limit
{ - Analog position lower limit { - Analog position lower limit { - Analog position lower limit
Format: {[value]
Description: This command sets the lower limit that is used during the calculation following a P
command for the analog position input. This command is used in conjunction with
the analog position enable “:” and absolute position “P” commands.
Range: 0 - 65535
} - Analog position upper limit } - Analog position upper limit
} - Analog position upper limit } - Analog position upper limit } - Analog position upper limit
Format: }[value]
Description: This command sets the upper limit that is used during the calculation following a P
command for the analog position input. This command is used in conjunction with
the analog position enable “:” and absolute position “P” commands.
Range: 0 - 65535
~ - Set address register ~ - Set address register
~ - Set address register ~ - Set address register ~ - Set address register
Format : ~[value] (No address is needed before this function. @~[value] will set the
address)
Description: This command set the address for communication inside the DPD75601 controller.
Range: 0 - 99