Amylior ALLTRACK M3, Руководство пользователя

Страница: 40 / 52

40
4. TOGGLE KEYPAD AND BUTTON KEYPAD
Activating power options (A) on these devices depends on
whether they are equipped with the feature of storing power
seating positions in memory (B) or not.
• ACTIVATION FOR KEYPADS
WITHOUT STORED MEMORY:
NOTE – Direction of toggle switch operation or choice of top/
bottom push buttons are factory-programmed, and they
FOLLOW THE MOVEMENT OF THE BODY.
To activate a power option, use the toggle switch or push
one button under the corresponding power option, hold until
the desired position is achieved, then release. Refer to the
pictogram legend on the next page. To return toward the
neutral position, toggle in the opposite direction or push the
other button.
• ACTIVATION FOR KEYPADS
WITH STORED MEMORY:
To activate the power option, always toggle forward (A)
or push upper button under the corresponding power
option, hold until the desired position is achieved, then
release. To return toward the neutral position, toggle forward
or push upper button
a second time .
To activate the memory positions stored, toggle backward (B)
or use lower buttons on the keypad.
NOTE – The memory-stored positions are personalised
depending on what the user has selected. Memory positions
do not necessarily correspond to the pictograms shown
above the toggle switch or push button.
STORING POWER POSITIONS IN MEMORY
!
WARNING
When selecting a position stored in memory, all actuators are in
motion to activate the desired power seating position. Ensure that
hands, any body parts and clothing are clear from any moving
parts.
1. USING THE KEYPAD
a) Set the seating in the desired position, then stop all seating
movements. If the seating is moving it will not be possible to
store the position.
b) Push and hold the 2 most left top toggle switches/buttons
on the keypad, after 3 seconds, when the green LED starts
flashing slowly, release both switches/buttons.
c) Push and hold the 2 most left bottom toggle switches/buttons
on the keypad, after 3 seconds, when the green LED starts
flashing fast, release both switches/buttons.
d) To select the memory seating location on the keypad, toggle
down one of the switches or push one of the bottom buttons
for 3 seconds. If the position is stored successfully, the green
LED will remain on.
NOTE - If it is not possible to store the position or the
processed failed, the red LED will flash for 3 seconds.
Try again.
Speed up
Speed down
2. USING THE SPEED BUTTONS ON THE JOYSTICK
a) Set the seating in the desired position, then stop all seating
movements. If the seating is moving it will not be possible to
store the position.
b) With the joystick, select seating mode and toggle right until
the screen shows M1/M2 or M3/M4.
c) Push the speed down button for 3 seconds, you will hear a
short beep.
Release the speed down button. Within the next 3 seconds,
perform step d) or e).
d) To store the position under the forward direction (M1/M3),
hold the speed up button for 3 seconds, you will hear a short
beep, then release. Your position is stored*.
e) To store the position under the backward direction (M2/
M4), hold the speed down button for 3 seconds, you will
hear a short beep, then release. Your position is stored*.
NOTE - * If it is not possible to store the position or the
processed failed, 3 short beeps will be heard. Try again.