29
KNEE SUPPORT
1. USING THE KNEE SUPPORT
Initial adjustments are done by your healthcare professional
and/or authorized supplier. Once the knee support is
adjusted, the strap must be fastened over the knee support for
additional safety. When not in use, the knee supports can be
swung-away and removed.
a) Installation:
(Fig.2-4)
• Place knee support pivot pin (D) into the locating
hole on top of the receiver (E) with the knee support
facing outward from frame.
• Rotate the knee support inward until latch plate
locks into place.
b) Removal:
(Fig.2-4)
• To remove knee support, press quick-release
lever (B).
• Rotate knee support outward (C) and lift (F).
!
WARNING
• Before operating the standing function, chest strap and
pelvic belt (Page 24), knee support strap must be
buckled up.
• ALWAYS use the knee support for the standing function.
• ALWAYS fasten the magnetic knee support strap buckles
together until a click is heard. Pull D ring (A) until snug.
See Fig.1.
Fig.1
1
PROHIBITED!
• NEVER use knee support without the chest strap and
pelvic belt for the standing function.
!
WARNING
Adjustments must be performed by a healthcare
professional and/or authorized technician. If
adjustments are wrong, it may cause personal injury or
damage the power wheelchair.
Fig.2
Fig.3
Fig.4
NOTE
-
For adjustments on knee support (angle & height) and knee
pad (depth, width, and angle), technicians must refer to the
Adjusting
Knee Support and Chest Strap Instruction Guide on on our
website
on our website:
https://amylior.com/instruction-guides/
D
B
C
F
E
A
Содержание ALLTRACK M3
Страница 51: ...51...