20
SEATING SYSTEMS
!
WARNING
1. Use of a seating system not approved by
AMYLIOR
may
alter the center of gravity of this power wheelchair. This may
cause a fall or tip-over.
2. NEVER change the seating system of your wheelchair unless
you consult your authorized supplier first.
3. NEVER raise your seating system to a height of more than
22” (560 mm) (measuring from the front of the seat pan to
the floor).
HOLSTERY FABRIC
!
WARNING
1. Replace worn or torn fabric of seat sling, seat cushion and
seat back as soon as you can. If you do not, the seat may
fail and cause you to fall. Worn fabrics may increase the
potential for a fire hazard.
2. Sling fabric will deteriorate with age and use. Look for
fraying, thin spots, or stretching of fabric at rivet holes.
Replace fabric as required.
3. Be aware that washing may reduce flame retardation
of the fabric.
POWER SEATING/STANDING
!
WARNING
1. OPERATION
• Use caution when operating the power wheelchair in the
reclined, elevated, tilted or standing positions.
• DO NOT attempt to operate power seating/standing
options while in motion or positioned on an incline.
• DO NOT attempt to operate power seating/standing
options around children, pets or animals.
• Through programming, it is possible to reverse the
direction of all power seating/standing functions. Ensure
you know which direction your seat is going to move
before operating.
2. REDUCED SPEED DRIVING (CREEP)
This power wheelchair is designed to automatically reduce
the maximum driving speed to a creep mode when it is
equipped with a seat elevate. Creep mode is activated
when it has reached a maximum limit of 3” (75 mm) of seat
elevation or as soon as the standing function is activated.
3. DRIVE LOCK-OUT
Drive lock-out is a safety feature designed to prevent the
power wheelchair from being driven while in a power tilt
angle over 15° relative to the level surface.
4. PINCH POINTS
Pinch points may occur when operating power
seating/standing options. Ensure that hands, any body
parts and clothing are clear of all power seating/standing
components that may get struck between moving parts
before operating them. Not doing so may lead to personal
injury and/or equipment damage.
5. TILTING POWER BASE WITH PUSH HANDLES
DO NOT attempt to tilt the power wheelchairs by pulling
down on the push handles. Power wheelchairs have heavy
bases. As such, attempting to tilt a power wheelchair to
traverse obstacles can damage components in the seating
system and/or actuators.
6. REMAIN CLEAR DURING POWER ACTUATOR
OPERATION
Please stay clear of any actuator while it is in motion. Power
components move over large travel ranges. Users should be
aware of their surroundings while in motion.
7. MAXIMUM USER WEIGHT
DO NOT exceed the weight capacity of
250 lb (113 kg)
for your power wheelchair or seating/standing system
configuration. Doing so could result in premature break
down or injury, and will void the warranty of your power
wheelchair.
8. LATCH MODE
Use caution while operating power seating function in
latched mode. In latch mode, powered seating will not stop
until a reverse command is performed, the end of travel is
met, or latch times out.
9. TIPPING RISK WHEN DRIVING
WITH SEAT FUNCTIONS IN USE
When operating the seat functions, the center of gravity is
also shifted, increasing the risk of tipping over. Make sure
the power wheelchair is on a level surface before activating
power seating options.
Always drive in the lowest speed and never tilt the seat
or back so far that the wheelchair cannot be
maneuvered safely.
10. POWER SEATING/STANDING OPTIONS
a) Seat tilt
b) Seat elevate (optional)
c) Backrest recline
d) Legrest elevate
e) Standing mode
Содержание ALLTRACK M3
Страница 51: ...51...