Amylior ALLTRACK M3, Руководство пользователя

Страница: 24 / 52

24
CENTER MOUNT ADJUSTMENT
(Fig.1-2)
NOTE - The following adjustments are done on both sides whether
one-piece footplate or split footplates as well as on both calf pads.
1. HEIGHT ADJUSTMENT
(FIG.2)
ONE-PIECE FOOTPLATE:
a) Loosen 4 securing bolts (A) with 4 mm Allen key.
b) Slide footplate to desired height.
c) Tighten bolts.
SPLIT FOOTPLATES:
a) Loosen 8 securing bolts (A), 4 one the sides and 4
behind with 4 mm Allen key.
b) Slide footplates to desired height.
c) Tighten bolts.
2. ANGLE ADJUSTMENT
(FIG.1)
a) Loosen securing screws (D) with a 6 mm Allen key
and 13 mm wrench
b) Tilt the footplate up and set to the desired angle
c) Tighten screws
3. CALF PAD ADJUSTMENT
(FIG.1-2)
LATERAL (width between both):
a) Loosen securing bolts (C) behind calf pads
with 4 mm Allen key. (Fig.1)
b) Move calf pad to desired width (E).(Fig.2)
c) Tighten bolts.
HEIGHT AND DEPTH
(FIG.1)
a) Loosen securing bolts (B) with a 4 mm Allen key.
b) Slide calf pad up/down on rail to desired height.
c) Move calf pad in/out to desired depth.
d) Tighten bolts.
Fig.1
B
B
B
B
D
B
C
C
D
Fig.2
A A
!
WARNING:
DO NOT place any weight or load on footplates/foot platform
while adjusting them.
NOTE - For articulating adjustment range, please refer to the
Power Elevating and Articulating Center Mount Legrest
Instruction Guide.
E