AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Страница: 185 / 218

Using Takenote™
179 TPI-PRO/DVI (Total Presentation Interface)
Using Takenote™
Overview
The TakeNote application allows you to create on-screen annotations over the displayed video sources, using a
Pointing device (i.e. USB mouse or touch screen) connected to a TPI-PRO or TPI-PRO-DVI.

Refer to the Protected Setup - TakeNote Control Page section on page 85 for descriptions of all of
the options on the TakeNote Control page.

Verify your NetLinx Master has the latest firmware (*.KIT) file loaded.

Verify your NetLinx Master’s IP Address and System Number have been properly entered into the
Master Connection section of the
System Settings page (see the Configuring the Master Connection
Settings section on page 42).
Enabling TakeNote on the TPI-PRO/DVI
The TakeNote feature of the TPI-PRO/DVI must be enabled before TakeNote can be used:
1.
Open the TakeNote Control page (FIG. 98):
a.
Press the front panel SETUP pushbutton to open the Setup page.
b.
Press
Protected Setup
to open the
Protected Setup
page. This page is password-protected:

Use the on-screen keypad to enter the default password -
1988.

Press
Done
to close the keypad.
c.
Press
TakeNote
to open the
TakeNote Control
page.
2.
Press
Enable/Enabled
until it toggles to
Enabled
(as shown in FIG. 98).
Starting a TakeNote Session
Once TakeNote has been Enabled, it is ready to use:
1.
Click Back in the Protected Setup page to return to the Setup Page.
2.
Click Exit in the Setup Page to close the Setup page.
3.
When TakeNote is enabled, the TakeNote icon is displayed in the upper-right corner of the display area
(FIG. 99):
FIG. 98
TakeNote Control page
Press to toggle
Enable / Enabled