manualshive.com logo in svg

AMX TPI-PRO-4, Руководство по эксплуатации/справочник

AMX TPI-PRO-4 - это устройство, которое позволяет управлять вашей системой автоматизации. Чтобы узнать как это делать, скачайте бесплатное операционное/справочное руководство с manualshive.com. В этом руководстве вы найдете все необходимые инструкции по использованию устройства.

Поделиться
Скачать
background image

Configuring the TPI-PRO/DVI

34

 TPI-PRO/DVI (Total Presentation Interface)

Startup Routine and Initial Panel Response



Discharge any acquired static electricity by touching a grounded metal object.



Verify the rear connections are secure and active. Refer to the 

Rear Panel Connectors

section on 

page 18 for detailed cable connector information.

1.

Connect the 12VDC Power Supply to the PWR connector on the rear panel. The TPI-PRO/DVI will 
power ON and initialize the startup routine when the power supply is connected. 

2.

After the startup routine, the connected touch monitor displays one of two possible screens:



If the TPI-PRO/DVI’s output resolution matches that of the touch monitor, continue by setting the 
touch drivers associated with the touch monitor. 

Refer to the 

Setting the Touch Drivers (Serial Touch Monitors Only)

section on page 35.



If the TPI-PRO/DVI’s output resolution does not match the resolution of the connected touch 
monitor, you must set the output resolution of the TPI-PRO/DVI to match the touch monitor.

Refer to the following section - 

Setting the Output Resolution

. 

Setting the Output Resolution

The TPI-PRO/DVI’s output resolution must match the output resolution and refresh rate set on the connected 
monitor.



The default output resolution is 

1280 x 1024 @ 60Hz

. 



The maximum output resolution is 

1920 x 1200 @ 60 Hz

.



Use the RESOLUTION pushbutton to alter the outgoing resolution to match the output pixel 
resolution and refresh rate set on the connected touch monitor.

1.

Press the RESOLUTION pushbutton to open the 

Resolution Setup 

page (FIG. 30). 

2.

Press the RESOLUTION button again to cycle through the available output resolution settings. Every 
consecutive button push cycles the output resolution to the next highest setting.



Double-push the RESOLUTION button to return to the previous setting.



Go to 

http://www.amx.com//techdocs/TPI-PRO.Supported.Touch.Monitors.xls

 to view/download 

the most recent List of Touch Monitors and USB / Serial Touch Drivers Tested with the TPI-PRO/
DVI (including the most current listing of tested USB touch panel drivers).

3.

The message "

Please wait, loading new resolution...

" indicates that the new resolution setting is being 

saved. Do not cycle or remove power while the new settings are being saved.

4.

Once your resolution is selected, you can use the outer screen area lines on the 

Resolution Setup

 page to 

adjust your monitor’s visible screen area. 



This could involve using the monitor’s video control to stretch and move the incoming video so that 

the borders follow the edges of the screen without disappearing. 



There are normally 60 seconds before the resolution times-out, but you can press the front panel 
Resolution button again to return to the previous resolution pattern and continue setting up the 
monitor.

Once power is applied, use the Power button to toggle the unit off and on.

An "OUT OF RANGE" message is often generated by the touch monitor.
Some monitors will not display a message, but will appear blank instead.

The TPI-PRO-DVI does not provide Component (YPbPr) or Interlaced outputs.

Содержание TPI-PRO-4



























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для TPI-PRO-4

Yaesu FT-817 - Modification Instructions preview
FT-817 -
Бренд: Yaesu Страницы: 2
Accuphase AD-60 Instruction Manual preview
AD-60
Бренд: Accuphase Страницы: 2
ADTRAN ATLAS 550 Manual preview
ATLAS 550
Бренд: ADTRAN Страницы: 2
Acrosser Technology AMB-VDX3H1 Series Quick Start Manual preview
AMB-VDX3H1 Series
Бренд: Acrosser Technology Страницы: 4
AXIOMTEK tBOX330-870-FL Series Quick Installation Manual preview
tBOX330-870-FL Series
Бренд: AXIOMTEK Страницы: 2
Funkwerk TR 200 aw/ bw Operating Instructions preview
TR 200 aw/ bw
Бренд: Funkwerk Страницы: 2
ETC Power Control Processor Configuration Manual preview
Power Control Processor
Бренд: ETC Страницы: 64
Intel Core 2 Quad Q9400 Product Brief preview
Core 2 Quad Q9400
Бренд: Intel Страницы: 2
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Бренд: Concept Pro Страницы: 28
SafeHome NVR903 Manual preview
NVR903
Бренд: SafeHome Страницы: 24
Magma ExpressBox7 Quick Installation Manual preview
ExpressBox7
Бренд: Magma Страницы: 2
Cypress Semiconductor CY7C1350G Specification Sheet preview
CY7C1350G
Бренд: Cypress Semiconductor Страницы: 15
Renesas M32173T-PTC User Manual preview
M32173T-PTC
Бренд: Renesas Страницы: 7
Thecus N5200BR User Manual preview
N5200BR
Бренд: Thecus Страницы: 90
LevelOne ServCon FPS-3003 Quick Install Manual preview
ServCon FPS-3003
Бренд: LevelOne Страницы: 45
MA Master Fader 1 User Manual preview
Master Fader 1
Бренд: MA Страницы: 4
NAUTICAST 300 2001 Product Manual preview
300 2001
Бренд: NAUTICAST Страницы: 20
INGENIA Everest CORE Product Manual preview
Everest CORE
Бренд: INGENIA Страницы: 58

Бренды по названию

Популярные бренды

Загрузить еще бренды