AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Страница: 64 / 218

TPI-PRO/DVI Configuration Pages
58 TPI-PRO/DVI (Total Presentation Interface)

Press the crosshairs to calibrate the panel.

When the calibration is complete, the Calibrate Page closes (returning to the last open
Configuration page).
Refer to the
Calibrating the TPI-PRO/DVI
section on page 36 for details.
Setup Page
Press the SETUP pushbutton on the front panel (see FIG. 54 on page 55) to access the Setup Page (FIG. 58).
The options on the
Setup
page center around the basic properties used by the touch device connected to the
TPI-PRO/DVI.
Alternatively, the Calibrate Page can be accessed via options on the Protected Setup
Page (see Protected Setup Page
section on page 71 ).
FIG. 58 Setup Page
Setup Page
• Exit: Saves any setting changes made on the page to disk, and returns you to the Main touch
panel page.
• Connection
Status icon:
The icon in the upper-right hand corner provides a visual indication of the connection status,
displayed on every page for convenience.
• The Connection Status icon reflects the connection icon in the Connection Status area of
this page (see below).
• A Lock appears on the icon if the TPI-PRO/DVI has established a connection with a
secured NetLinx Master ( requiring a username and password ).