AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Страница: 80 / 218

Protected Setup Page
74 TPI-PRO/DVI (Total Presentation Interface)
Protected Setup - System Settings Page
Select System Settings on the Protected Setup Page (see FIG. 69 on page 71) to access the System Settings
page (FIG. 70).
The options on the
System Settings
page set the DNS Address information with its corresponding IP
communication parameters, NetLinx Master communication settings, and reads the device number assigned to
the G4 device.

Red
fields are user-editable

Blue
fields cycle through available choices

Grey
fields are read-only
FIG. 70 Protected Setup - System Settings Page
Protected Setup - System Settings Page
IP Settings:
• DHCP/
Static:
Sets the G4 device to either DHCP or Static communication modes.
• DHCP (Dynamic Host Configuration Protocol) assigns IP Addresses from client stations
logging onto a TCP/IP network via a DHCP server.
• Static IP is a permanent IP Address that is assigned to a node in a TCP/IP network.
• Default = DHCP
• IP Address: Sets the IP Address assigned to the TPI-PRO/DVI.
• Subnet Mask: Sets a subnetwork address to the TPI-PRO/DVI.
• Subnetwork mask is the technique used by the IP protocol to filter messages into a
particular network segment (Subnet).
• Gateway: Sets a gateway value to the TPI-PRO/DVI.
• Gateway is a computer that either performs protocol conversion between different types
of networks/applications or acts as a go-between two or more networks that use the
same protocols.
• Host Name: Sets the host name of the TPI-PRO/DVI.
Note: If the Host Name is left blank, it will automatically resort to the default - "localhost".