AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Страница: 91 / 218

Protected Setup Page
85 TPI-PRO/DVI (Total Presentation Interface)
Protected Setup - TakeNote Control Page
Select TakeNote on the Protected Setup Page (see FIG. 69 on page 71) to access the TakeNote Control Page
(FIG. 72).
The options on the TakeNote Control page center around enabling and disabling the TakeNote™ Annotation
Application. The TakeNote application allows you to create on-screen annotations over the displayed video
sources, using a Pointing device (i.e. USB mouse or touch screen) connected to a TPI-PRO or TPI-PRO-DVI.
The TPI-PRO/DVI supports up to eight external TakeNote clients simultaneously, in addition to the internal
connection. A remote client can be any other AMX G4 touch panel using either a Computer Control button
with TakeNote enabled, or a TakeNote button.
FIG. 80 Protected Setup - TakeNote Control Page
Protected Setup - TakeNote Control Page
Takenote Settings
• Enable/Enabled: The Enable/Enabled button toggles between the two TakeNote activation settings:
• Enable - deactivates the TakeNote feature on the TPI-PRO/DVI.
• Enabled - activates the TakeNote feature on the TPI-PRO/DVI.
Default = Disabled .
• TakeNote Port: Press within this field to invoke the on-screen TakeNote Port keypad, and enter the
Port number on the TPI-PRO/DVI that will be reserved for use by TakeNote
(default =
1541 ).
This is the port number that remote TakeNote clients must specify in their G4
Computer Control button's TakeNote properties, or their TakeNote button's
properties.
• Confirm Client
Connections:
When a remote client attempts to connect to the device, a dialog is displayed on the
screen asking whether the remote client should be allowed to connect.
• Select Yes on the dialog to allow the connection
• Select No to deny it
Remote clients can connect at any time.