AMX TPI-PRO-4, Руководство по эксплуатации/справочник

Страница: 83 / 218

Protected Setup Page
77 TPI-PRO/DVI (Total Presentation Interface)
Protected Setup - G4 Web Control Page
Select G4 Web Control on the Protected Setup Page (see FIG. 69 on page 71) to access the G4 Web Control
Page (FIG. 72).
The options on the G4 Web Control page center around enabling and disabling both the display and control of
your TPI-PRO/DVI, via the web (FIG. 72). An external PC running a VNC client (installed during the initial
communication to the G4 device) makes this possible.
Each G4 device supports the open standard Virtual Network Computing (VNC) interface containing a VNC
server, which allows it to accept a connection from any other device running a VNC client.
Once a connection is established to that target device, the client can control the TPI-PRO/DVI remotely.
The TPI-PRO/DVI supports up to four G4 Web Control users simultaneously connected to the TPI-PRO/DVI.
FIG. 72 Protected Setup - G4 Web Control Page
Protected Setup - G4 Web Control Page
G4 Web Control Settings
• Enable/
Enabled:
The Enable/Enabled button toggles between the two G4 Web Control activation set-
tings:
• Enable - deactivates the G4 Web Control feature on the TPI-PRO/DVI.
• Enabled - activates the G4 Web Control feature on the TPI-PRO/DVI and allows
an external PC running a VNC client to access the unit, after the remaining fields
are configured.
Default = Enabled .
• Network Interface
Select
A read-only field that displays the method of communication to web.
• Wired is selected because it is the only method of communication to the web (via a
direct Ethernet connection). This is a default setting since no wireless interface is
available.