AMX Precis Скачать руководство пользователя страница 10

Страница: 10 / 44

1.1 Front of Panel

A Precis Remote Panel operates in three standard modes: Switch

(default), Status, and Macro. Use Switch mode to execute switches,

Status mode to verify signal status, and Macro mode to execute macros

(local presets). An additional mode, Lock mode, enables the panel to be

locked. An optional fifth mode, Volume Adjust, is also available on

some panels.

Switch mode is the default mode. It can be accessed at any time by

pressing the Cancel key.

Cancel Key

Returns the Remote Panel to Switch mode from any other mode.

Pressing the Cancel key also cancels an incomplete operation before

returning the system to Switch mode.

Macro Key

Places the Remote Panel in Macro mode, ready to execute macros (see

page 3-5).

Lock Key

Places the Remote Panel in Lock mode, ready to lock (or unlock). This

limits access to the system to prevent accidental switching. A password

number is required to lock and unlock the panel (see page 4-1).

Status Key

Places the Remote Panel in Status mode, ready to verify switching status

(see page 3-3).

1-2

Precis Remote X/Y Control Panel

Introducing the Precis Remote Panel

oduction

Destination keys

Source keys

Level keys

Cancel key

Macro key
(Up Arrow key)

Lock key
(Down Arrow key)

Status key
(Volume Adjust key)

Figure 1: Front view of a 12x8 Precis Remote (37-282) with Volume Control

Содержание Precis













































Результаты поиска

Содержание Precis

Отзывы:

Похожие инструкции для Precis

Бренды по названию

Популярные бренды

AMX Precis, Руководство по установке и эксплуатации

Результаты поиска

Содержание Precis

Отзывы:

Похожие инструкции для Precis

Бренды по названию

Популярные бренды