AMX Precis Скачать руководство пользователя

Страница: 3 / 44

Important Safety Information
and Instructions

When using and installing your AutoPatch product, adhere to the following basic safety

precautions. For more information about operating, installing, or servicing your

AutoPatch product see your product documentation.

Read and understand all instructions before using and installing AutoPatch products.

Use the correct voltage range for your AutoPatch product.

There are no user serviceable parts inside an AutoPatch product; service should only

be done by qualified personnel.

If you see smoke or smell a strange odor coming from your AutoPatch product, turn

it off immediately and call AutoAssist.

Turn off and unplug an enclosure before adding or removing boards, unless

otherwise specified in that product’s documentation.

To avoid shock or potential ESD (Electrostatic Discharge) damage to equipment,

make sure you are properly grounded before touching components inside an

AutoPatch product.

For products with multiple power supplies in each unit, make sure all power supplies

are turned on simultaneously.

Use surge protectors and/or AC line conditioners when powering AutoPatch

products.

Only use a fuse(s) with the correct fuse rating in your enclosure.

Make sure the power outlet is close to the product and easily accessible.

Make sure the product is on or attached to a stable surface.

Turn off equipment before linking pieces together, unless otherwise specified in that

product’s documentation.

For safety and signal integrity, use a grounded external power source and a grounded

power connector.

Precis Remote X/Y Control Panel

Safety

Содержание Precis













































Результаты поиска

Содержание Precis

Отзывы:

Похожие инструкции для Precis

Бренды по названию

Популярные бренды

AMX Precis, Руководство по установке и эксплуатации

Результаты поиска

Содержание Precis

Отзывы:

Похожие инструкции для Precis

Бренды по названию

Популярные бренды