AMX endeleo UDM 1604, Руководство пользователя, Страница: 85 / 94

7-17
Section 7
Advanced Administration
UDM1604-USG – 2.0 - 0606
(3) The serial configuration is accessed using the
Protocol section of this page.
(4) Click on the drop down box and select the serial
option.
Note;
Note if a serial protocol has been created this will also
become available via this drop down section.
(5) This will then bring up the serial configuration
options.
(6) The first step is to initialise the receive unit. This will
clear any previously stored commands and ensure a
clean start. Click on
Initialise .
(7) Once the unit has been initialised select the
appropriate
baud rate from the drop down box.
(8)
The Endeleo hardware has a predetermined set of
actions against which you can associate serial
strings.