AMX endeleo UDM 1604, Руководство пользователя

Страница: 51 / 94

5-7
Section 5
Operating the UDM Hub
UDM1604-USG – 2.0 - 0606
(3) Look at the keys (0 to F which represent the keys on
the Endeleo RX01 Remote Control) to the left of screen.
(4)
In line with the Key (e.g. key F) move the mouse
across to the Control field and select the command
from the drop down list which this key (key F) on the
Endeleo RX01 Remote Control will issue. For Example
choose Play.
Figure 5-9: Assigning Play to key F on the Endeleo remote control
Note;
Ensure the correct key on the Endeleo Remote RX01
corresponds with the correct command.
(5) Now select whether this button (on the remote control)
should be associated with the Port (display device) or
an actual Device (e.g. a DVD player added to the
system as a device) when it is pushed.
(6) The Endeleo RX unit will now accept the relevant
command from the Endeleo RX01 Remote Control i.e.
key F on the Endeleo RX01 Remote Control will play the
device (DVD).
5.4 Passthrough Mode (Inputs A – D)
Devices can also be placed into Passthrough Mode. Passthrough Mode
allows an Endeleo TVM remote control (or Sky remote control) to be
used to control TV channels being viewed through the UDM Hub or
devices connected to the UDM Hub e.g. a DVD player.
Note;
A device e.g. a DVD player can be stopped, paused and
started etc using the TVM remote control or a Sky plus
remote control.
The following steps must be taken if Passthrough Mode is to function
correctly;
• Device must be added to the system as an
Input.
• IR blaster (correct IR port) at the rear of the
chassis must be connected to the device.