AMX endeleo UDM 1604, Руководство пользователя

Страница: 48 / 94

5-4
UDM1604-USG – 2.0 - 0606
Section 5
Operating the UDM Hub
(2) Click on the downward arrow to the right of the
Control field. Refer to Figure 5-4.
Figure 5-4: Selecting a control to be executed at the port(s)
(3) A standard list of controls programmed into the web
interface will be displayed.
Select the required
control.
Figure 5-5: Standard list of Controls
Note;
Where a custom control is required type in the IR code
for the command. Refer to Appendix A of this guide.
(4) Once selected click on the Execute button. The
command will be executed for the relevant port.
Figure 5-6: Execute button
Note;
Ensure a TX Infrared bud (smaller of the IR buds) has
been connected to the IRTX port of the Endeleo RX unit
and attached to the Device’s IR sensor before issuing
the command. This Infrared TX bud will be used to
transmit the command from the RX unit to the device’s
infrared sensor.
Endeleo TX bud