AMX endeleo UDM 1604, Руководство пользователя

Страница: 22 / 94

2-2
UDM1604-USG – 2.0 - 0606
Section 2
Input configuration
(4) Name the Input Type appropriately.
(5) If the Input Type is Composite, then the screen will
refresh and enable the administrator to name each of
the 3 available composite sources separately.
Figure 2-3: Possible Composite Video sources
(6) Name the Composite Video types appropriately.
2.2 Configuring TVM (AV) Inputs
TV Inputs from an Endeleo TVM hub can also be fed into the UDM hub
for display at screens throughout the location.
Warning!
The power at the relevant TVM port will have to be
disabled using the <k> <port no> command or
through the TVM Web Browser before being
connected to a UDM Hub. Refer to the TVM User
Guide.
2.2.1 Configuring TVM inputs for a UDM Hub
(1) Ensure the port on the TVM is configured to display the
correct channel – refer to the TVM documentation.
(2) Ensure the power on the TVM port which will transmit
the TV feed has been switched off using the [k] [port
no] command (or using the Web Browser).
(3) Connect a Cat5 cable from the TVM port to the relevant
TVM port on the front of the UDM hub.
(4) Click on the Inputs option and in the Inputs section
configure the TVM input - Name the port accordingly.
TVM (AV) inputs