Product Overview and Specifications
30
Instruction Manual – DXLink™ Twisted Pair Transmitters/Receiver
DXLink Transmitters and Receiver Specifications
The specifications apply to the following Transmitters and Receiver:
FG1010-310 – DXLink Multi-Format Transmitter Module
FG1010-300 – DXLink HDMI Transmitter Module
FG1010-320-BL – DXLink Multi-Format Wallplate Transmitter, Black*
FG1010-320-WH – DXLink Multi-Format Wallplate Transmitter, White*
FG1010-325-BL – DXLink Multi-Format Decor Wallplate Transmitter (US), Black*
FG1010-325-WH – DXLink Multi-Format Decor Wallplate Transmitter (US), White*
FG1010-500 – DXLink HDMI Receiver Module
* A limited set of specifications apply, as the Wallplate TX and Decor Wallplate TX
have a limited set of features
when compared to the Multi-Format TX and HDMI TX.
AMX reserves the right to modify its products and their specifications without notice.
General Specifications
Parameter
Value
Approvals
CE, UL, cUL, FCC Class A, RoHS
AC Power (Modules Only)
• 100 to 240 VAC single phase, 50 Hz to 60 HZ
• 0.6 A @ 115 VAC max.
DXLink Power
•
TX and RX Modules:
Power can also be supplied by a DXLink Power
sourcing device such as an Enova DGX 8/16/32 Digital Media Switcher or
compatible Enova DVX All-In-One Presentation Switcher (e.g., -3155HD) or
PS-POE-AT-TC High Power PoE Injector (FG423-84) or Power over
DXLink injector PDXL-2 (FG1090-170). AMX does not support the use of
any other power supplies or power injectors as these may potentially
damage the DXLink equipment.
• To use PS-POE-AT-TC or PDXL-2 as a power source, the TX and RX
modules require firmware v1.2.40 for TX and v1.0.80 for RX or later.
• Power Budget: When installed in conjunction with the Enova DGX Digital
Media Switcher, use the Enova DGX Configuration Tool located at
www.amx.com/enova to determine the power requirements of the
configuration and whether any of the DXLink Transmitters or Receivers
should be powered with the local power supplies or the supported Power
over DXLink injectors. The configuration tool contains instructions on how
to determine power requirements.
•
Wallplate TX & Decor Wallplate TX:
Power
must
be supplied by a DXLink
Power sourcing device such as an Enova DGX 8/16/32 Digital Media
Switcher or compatible Enova DVX All-In-One Presentation Switcher
(e.g., -3155HD) or PS-POE-AT-TC High Power PoE Injector (FG423-84) or
Power over DXLink injector PDXL-2 (FG1090-170). AMX does not support
the use of any other power supplies or power injectors as these may
potentially damage the DXLink equipment.
• To use PS-POE-AT-TC or PDXL-2 as a power source, the wallplates require
firmware v1.2.40 or later.
Power Consumption,
Local 12 V Supplied (max.)
Multi-Format TX 10 W (13.5 V), HDMI TX 9 W, HDMI RX 18 W
Power Consumption,
Enova DXLink Power Supplied (max.)
Multi-Format TX 10 W, HDMI TX 9 W, Wallplate TX 7 W,
Decor Wallplate TX 7 W, HDMI RX 15 W
Thermal Dissipation,
Local 12 V Supplied (max.)
Multi-Format TX 34 BTU/hr. (13.5 V), HDMI TX 31 BTU/hr.,
HDMI RX 61 BTU/hr.
