Using the DXP-PRO Wizard
54
DXP-PRO v1.1 - Programmer’s Guide
Switcher Outputs tab
Within the
Outputs
section, in addition to assigning devices to outputs of the switcher, you can
assign a display device as the primary display. When selecting a source on the completed touch
panel, the corresponding input will be connected to the primary display's output by default. This
allows sources to connect to the primary display without having to visit the switcher page on the
touch panel, simplifying the user interface. The Outputs section also allows you to send a video
selection command to any display device when that output is chosen.
For example, if you have multiple input types connected to a display, you may want to assign an
output on the switcher for each type, and then issue a command to the display device to switch to
the corresponding input. The number of outputs available in this section is based on the information
that was entered on the System Information page.
Output Number
- This column is a list of all available output values open for assignment
as outputs from the switcher.
Display Name
- This column reflects a listing of user-defined Display name entries
assigned to the selected Switcher Output values. These names are entered within the
Display Name
field located on the bottom of this page.
Input Select
- This column displays a list of input commands that are sent to the display
device in order to switch the input on those selected display devices.
The lower part of this tab contains a series of selectable fields and radio buttons that allow you to
populate the available outputs from the Switcher:
Output Number
- This is a read-only field that changes to reflect the currently selected
Switcher output
field (from the upper table).
Destination
- This drop-down list provides you with a listing of available devices that can
be assigned to outputs from the switcher. These were previously entered and configured
within the System Information page.
Display Name
- This editable field provides you the ability to enter in an alphanumeric
string that is associated with the switcher output destination number. Altering this field
results in a change of the Display Name associated with the selected Output Number
from the Switcher.
Video Select
- This drop-down list allows you to choose from a list of pre-defined input
commands that are sent to the selected display devices (to switch their input). A change
to this selection is reflected within the Input Select list (on the top of the page) after
clicking the
Apply
button.
1.
Click the
Apply
button to apply the changes made to the selected Switcher Output Number
values.
2.
Click the
Clear
button to clear the Display Name and Input Select information from the
selected Output Number value.
