Using the DXP-PRO Wizard
36
DXP-PRO v1.1 - Programmer’s Guide
Device Configuration dialog - IR Mapping tab
The options in the IR Mapping tab (FIG. 5) help to insure that the button you press on the touch
panel does what you expect. IR files, especially custom IR files, do not always use the same
channel numbers for the same IR functions. As a result you must map each IR function for each IR
device in the system. If irregular functions occur in the finished system, it is a good idea to revisit
this tab.
It is also important to note that changing the IR mapping will affect subsequent configuration
dialogs. The IR Mapping tab is divided into two main areas:
IR Function List
and the
Program
Function List
.
The
IR Function List
is on the left side of the window. The IR file selected on the Device
Data tab is opened and all functions and their associated names and channel numbers are
listed.
The
Program Function List
is listed on the right side of the dialog. The Program
Function List is populated with the supported functions for the Device Type selected on
the Device Data tab.
Mapping a Function
1.
Click on the desired IR function in the IR Function List and click on the associated function in
the Program Function List.
2.
Then, click on the button with the three right facing arrows, "
>>>
", and the IR Function Name
and the Channel are copied across to the Program Function List.
FIG. 5
Device Configuration dialog - IR Mapping tab
