Using the DXP-PRO Wizard
46
DXP-PRO v1.1 - Programmer’s Guide
Note for Radia Lighting Systems
On Radia lighting systems, channels 1-128 represent Radia lighting presets 1-128. If a channel is
on, then the corresponding preset is on. However, on startup NetLinx resets all channels to 0 (OFF).
Radia does not report the status of its channels when the Master comes up, and consequently the
software believes the state of all of the presets is OFF. Therefore, until a preset changes in the
system, the channel states are not reported.
It is important to have the Lighting Preset information prior to finishing the project.
Enter a new
Preset Name
,
Address
and
Button Number
, and click the
Add
button to add a
new preset to the bottom of the list.
Select a Preset in the list and click the
Delete
button to delete that preset from the list.
The
Insert
button inserts a new preset at the order number of the currently selected
preset.
Click the
Apply
button after editing a preset to apply the changes.
The
Clear
button clears the
Preset Name
,
Address
and
Button Number
information for a
selected preset.
Touch Panel Interfaces Dialog
Design XPress - Professional (DXP-PRO) requires that at least one touch panel is defined within
the system (FIG. 11).
You can define up to 8 touch panels in the system.
FIG. 11
Touch Panel Interfaces dialog
The default
panel Device
ID is 10501.
Each
consecutive
panel that is
added to the
project
increments
this value by
a value of 1.
Determines
the menu
bar on the
panel
Excludes
these menu
items from
being
displayed
on the panel
