![background image](http://html1.mh-extra.com/html/amx/and-nmx-dec-n2235/and-nmx-dec-n2235_instruction-manual_2938518009.webp)
Introducing Your New N2000 Series Devices
9
N2000 Series User Manual
Application Examples
FIG. 8
Loop Through HDMI Port on Encoder
P1
8-wire RJ45 female.
10/100/1000 Mbps 10/100/1000Base-T auto-sensing gigabit Ethernet switch port.
OR
1G SFP port which accepts compatible fiber transceivers or direct attach cables (copper or fiber).
Modules sold separately.
Note: SFP support is model-dependent. Depending on the model, the P1 port is either an SFP (N2135/
N2235) or an RJ45 (N2122/N2222/N2212) network connection.
IR
2-pin terminal Phoenix connector. Provides IR output only (33 to 60 kHz). An emitter may be necessary
(not included).
*
Not available on the N2212 Decoder.
RS232
3-pin terminal Phoenix connector which provides a serial control interface. Full duplex communication.
Available terminal speed settings: 1200 to 115200 baud rate.
AUDIO
5-pin terminal Phoenix connector which provides user-selectable balanced/unbalanced, dedicated audio
input (for Encoders) and output (for Decoders).
*
Not available on the N2212 Decoder.
HDMI IN
HDMI video input (Encoders).
HDMI OUT
HDMI video output (Decoders). Passthru HDMI video (Encoders).
VGA IN
DB-15 analog input. Allows for the use of analog video sources.
*Applies to Encoders only.
Front and Rear Panel Descriptions (Cont.)