![background image](http://html1.mh-extra.com/html/amx/and-nmx-dec-n2235/and-nmx-dec-n2235_instruction-manual_2938518045.webp)
Encoder Configuration Options
45
N2000 Series User Manual
Logs Page
Click the
Logs
link at the top of any of the main web pages to access the page shown in
Figure 19
. The
Logs
page displays a
command log that lists all TCP and UDP messages the unit receives. It also displays the web browser’s IP address and gives you
options to
Refresh
and
Reset
Logs
.
FIG. 19
Logs Page
LLDP Page
Click the
LLDP
link at the top of any of the main web pages to access the page shown in
Figure 20
. The
LLDP
page displays
information from the Link Layer Discover Protocol (LLDP) packet which identifies the port number and switch the device is
connected to.
FIG. 20
LLDP Page
Set EDID to Pass-thru
Set the EDID to the pass-thru EDID of the connected display to
HDMI OUT
.
Reset EDID
For
Digital
, choose a standard EDID from the drop-down menu and click
Reset EDID
to apply. For
Analog
, no
selection is necessary.
TABLE 14
EDID Page Options (Cont.)
Option
Description