![background image](http://html1.mh-extra.com/html/amx/and-nmx-dec-n2235/and-nmx-dec-n2235_instruction-manual_2938518041.webp)
Encoder Configuration Options
41
N2000 Series User Manual
N-Act Page
Click the
N-Act
link at the top of any of the main web pages to access the page shown in
Figure 14
. This page allows you to create
command lists which are performed automatically by the unit based on power or video connection (without the use of an outside
controller). For example, you can tell a projector and lights to come on when the Encoder powers up. You can add multiple
commands for each event. See
Table 11
for option descriptions.
FIG. 14
N-Act Page
TABLE 11
N-Act Page Options
Option
Description
Enable N-Act Events
Enable to activate the configured events.
Power on Event
Create/delete/test events to be performed when the Encoder powers on. Visit our website for more details on
Application Programming Interface (API) commands.
Video Cable Connected
Event
Create/delete/test events to be performed when the Encoder is connected to a video source. The
Trigger Delay
field specifies how long the device has to be connected for the command to be executed.
Video Cable
Disconnected Event
Create/delete/test events to be performed when the Encoder is disconnected from a video source. The
Trigger
Delay
field specifies how long the device has to be disconnected for the command to be executed. This keeps
accidental (momentary) disconnects from triggering the command sequence.
Save Events
Click to save changes made to this page.
Import/Export
Use this section of the page to import/export N-Act event configurations. from one unit to others.