![background image](http://html1.mh-extra.com/html/amx/and-nmx-dec-n2235/and-nmx-dec-n2235_instruction-manual_2938518049.webp)
Decoder Configuration Options
49
N2000 Series User Manual
Lineout Volume
This slider controls the output gain on the analog audio
output. By default, it controls both the left and right
lineout channels. Click the
Set Left/Right
link to control
channels individually.
Enable HDMI Audio
Set HDMI audio to be disabled, enabled, or selected
automatically based on the source.
ON
forces audio on at all times.
AUTO
reads the EDID
of the connected device to determine whether or not
to send audio.
Advanced Settings
Refer to
Advanced Settings
on page 50 for details on
the options available from this link.
RS232 Settings
Refer to
RS232 Settings
on page 52 for details on the
options available from this link.
Allow SVSI Multicast
Disable this option to prevent the port from outputting
multicast video traffic.
Particularly useful if you are connecting a non-SVSI
device to a port for network-based control.
Disable P1
Completely disables the P1 port for all traffic.
Once disabled, anything connected to the P1 port will
no longer be available on the network.
Cancel
Click to return all controls to the last saved
configuration.
Save
Click to accept changes made to these controls.
TABLE 1
Settings Page: Decoder Setup Section (Cont.)
Option
Description
Notes