![background image](http://html.mh-extra.com/html/amx/ac-cv6t/ac-cv6t_instruction-manual_2938705007.webp)
Product Information
3
6" Color Video Touch Panels
The CV6T is designed to be used on any flat/level surface. The AC-CV6T (FIG. 2) is a metallic
tabletop enclosure that encases the CV6 touch panel and allows its use on a wide variety of
horizontal surfaces.
Specifications AXD-CV6 (Cont.)
Rear Connectors:
AXlink
4-pin bus connector for connection to the AMX Central Controller.
PWR
+12 VDC power supply; power is supplied through the bus or an external PSN power
supply.
RS-232
DB-9 male connector for data transmission or Microsoft
®
mouse control
Video
BNC female connector (NTSC/PAL/SECAM)
Character Support:
Unicode
®
character support for far-eastern languages such as Chinese.
• Characters for middle-eastern languages such as Arabic are not supported within
the Unicode fonts because they are bi-directional. Buttons with Unicode fonts can
only be created and edited using TPDesign3 and NetLinx Studio. Refer to the
respective manuals for additional information.
Compatibility:
Axcess, NetLinx, and Landmark systems (AXlink is the most common control stan-
dard for this system).
Operating
Environment:
Indoor operation at temperatures between 0
º
C (32
º
F) to 50
º
C (122
º
F) and a
humidity range of 5% to 90% RH (non-condensing).
Installation Kit:
• 4-pin AXlink data/power connector
• 2-pin PWR connector
• Drywall clip set (2-drywall clamps and 2- #8 (2" long) screws)
• 4-#4-40 machine screws and threaded inserts
Enclosure:
• Metal sub-plate and bezel with black or white matte finish
• Detachable magnetic front panel bezel
Installation Cutout:
Cutout Template for the AXD-CV6 is available as drawing number 62-5924-06 and
inserted in the product packaging.
This file provides 1:1 cutout dimensions for the CV6 conduit/wallbox. For
replacement of the cutout, contact your AMX sales representative.
Optional
Accessories:
• AC-CV6T Accessory Tabletop (used to mount an AXD panel onto a tabletop
surface
• CB-CV6 Conduit/wallbox (includes flanges for installation to studs during the
construction phase).
Conduit/Wallbox should only be mounted to a beam
before a drywall is installed (pre-wall).
• Optional spacers and bezels for international sales
• PSN2.8 Power supply (can be used to power the CV6)
• PSN6.5 Power supply (recommended to power the CV6)
FIG. 2
AC-CV6T Tabletop Enclosure views (CV6 unit within an AC-CV6T enclosure)
Front view
Rear view
Strain relief/cable
insertion location
Mounting blocks (2)