Thank you for purchasing an OmniMount product.
Warranty: Limited Lifetime on manufacturing defects and workmanship.
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation instructions. OmniMount Sys-
tems disclaims liability for any difficulties arising from the interpretation of information contained in these instructions.
If OmniMount products are used for purposes other than their original intent, OmniMount, its distributors and retailers
shall not be held responsible or liable for injuries or property damage, direct, indirect, or consequential, which may arise
from the inability to use this product safely, properly, and in the manner for which it has been designed and manufac-
tured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or accident.
OmniMount Systems, Inc.
8201 South 48th Street • Phoenix, AZ 85044-5355
1-800-MOUNT-IT • www.omnimount.com
P/N 1001156—Rev. B 7/2004
Step 4
Install the
Wall Plate
onto the
Monitor Plate
using
the supplied
1/4”-20 Screws
(3) and
Nylon Washers
(10).
Carefully hang the monitor by sliding the keyhole
slots on the Wall Plate over the protruding screws, as
indicated by arrows in Fig. 5.
Tighten the screws holding the Wall Plate.
Note:
Tilting the monitor away from the wall, im-
proves access to the wall mounting screws.
Fig. 5
Step 5
Adjust tension of the Tilt Screw (Fig. 5) to provide
the desired degree of adjustability or locking of tilt
mechanism.
QM100T:
LCD Tilt Mount
Installation Instructions
IMPORTANT: Consult a qualified installer if you have any questions
regarding the proper installation of this wall mount system.
Questions? 1-800-MOUNT IT
•
Universal VESA mount
•
Easy to install
•
+15º to -5º of tilt
•
Can be inverted
•
40 lbs (18.1 Kg) capacity
