Ammann ARX 36, Оригинальное руководство

Страница: 24 / 152

24 ARX 4
120
8531
|
03.
07.
2012
Special operating
modes
●
Transport of the roller from A to B (crane and low loader).
●
Cleaning the roller.
●
Maintenance of roller according to maintenance plan or in the event of defects.
●
Rectification of machine faults by trained personnel based on error messages.
●
Towing the roller.
●
Proper disposal by the operator in accordance with national regulations.
2.4.2 Requirements for the roller driver
Only trained, suitable and reliable specialists with a valid national driving license for
this category of vehicle may operate the rollers.
2.4.3 Application limits
Tab. 2-6 Limits for application in consideration of environmental conditions
2.5 Inappropriate use
Inappropriate use includes any use not listed under intended use. Note the following
in particularly:
●
The roller is not a playground.
●
The roller must not be used for traction.
●
The roller is not a passenger transporter.
●
In the case of movements greater than 3km, the roller must be loaded on a trans-
porter.
●
The roller is not a rock crusher, breaking chisel or similar.
2.5.1 Disclaimer
Ammann Schweiz AG accepts no liability for maintenance of reliable functioning of
the roller if it is not used appropriately.
Unauthorized conversions and changes to the roller are prohibited for safety reasons
and void any and every Ammann guarantee as well as, possibly, the CE directive.
Replaced spare or wear parts must meet the technical requirements specified by
Ammann. These requirement are fulfilled if only original Ammann spare parts are
used.
Operation Storage
Temperature limit -10°C to +48°C -25°C to +48°C
Humidity All-year operation / outdoor storage
Terrain Level Level
Slope up 30% with / 40% without vibration 40%
Slope down 30% with / 40% without vibration 40%