Ammann ARX 36 Скачать руководство пользователя страница 136

Страница: 136 / 152

136

ARX 4

120

8531

03.

07.

2012

13.1

Introduction

The roller must be disposed of properly; ask your authorized dealer.

13.2

Removal and depressurization of the gas struts

In case of disposal, pressurized gas struts must be depressurized according to the
following regulations:

Fasten the pressurized tube between two prismatic jaws without deforming it
and in such a way that the dimension X is at least 25mm (see below).

To depressurize:

Slowly cut the pressurized tube open at the points indicated using a

handsaw

or,

Drill a hole in the tube using a

drill

with about a 3

mm diameter.

CAUTION

Environmental hazard through operating materials!

• Do not allow any liquids get into drains, soil or the environment.

WARNING

Eye injury!

Because of the high internal pressure, chips and oil can spat-
ter from the site of sawing or drilling.

• Wear eye and face protection.
• Cover the site of the saw cut.

CAUTION

Environmental hazard through operating materials!

Gas struts are filled with oil.

• Do not allow any liquids get into drains, soil or the environment.

Содержание ARX 36

























































































































































Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды

Ammann ARX 36, Оригинальное руководство

Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды