Ammann ARX 36 Скачать руководство пользователя страница 75

Страница: 75 / 152

Options

120

8531

03.

07.

2012

8.5.1

Transport with ROPS folded down

During transport with the ROPS folded down, e.g. in a container or closed truck, you
must remove the whole roof.

8.5.2

Fitting / removing the roof

Please note the work/assembly instructions contained in the delivery: (ANW-4397
roof option).

Fitting the roof

Screw the roof to the ROPS with the four Allen screws and washers.

1.1

Make sure that the screws are always firmly tightened.

Roof with revol-
ving warning light

Loosen the wing nuts of the revolving warning light.

Lift the warning light out of the holder.

8.5.3

Transport with ROPS folded up

8.5.4

Removing the tarpaulin

Detach the hook-and-pile fastener on the sides and the leather straps in the
corners.

Remove the tarpaulin.

Fig. 8-6 Removing the tarpaulin

WARNING

Material damage and hazard to road traffic

The pressure of the head wind can cause the material to tear
or come off and endanger traffic coming from behind.

• You must remove the tarpaulin during transport on an open

truck.

Содержание ARX 36

























































































































































Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды

Ammann ARX 36, Оригинальное руководство

Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды