Ammann ARX 36 Скачать руководство пользователя страница 62

Страница: 62 / 152

ARX 4

120

8531

03.

07.

2012

Driving back-

wards

Pull the operating lever back slowly.

The roller moves backward.

Slowing down

Slowly pull the operating lever into the neutral position.

The roller is automatically hydrostatically braked.

NOTE

If the operating lever is released it does not automatically return to the neutral
position. The lever remains at its current position.

NOTE

If the operating lever is jerked over the neutral position, e.g. as a result of an
emergency situation, the machine will stop.

7.6

Work gear / transport gear

The roller is equipped with two gears.

Turn the switch:

toward the left:

the hydraulic system is switched to the "transport gear" drive

position.
The vibration

cannot

be switched on now. The roller drives at a high

speed.

toward the right:

the hydraulic system is switched to the "work gear" drive

position. The vibration can now be switched on as well. The roller drives at a
low speed.

7.7

Turning off the engine

Put the operating lever into neutral position.

The roller is automatically hydrostatically braked.

Move the speed adjusting lever downward into the idle position.

Turn the ignition key:

Содержание ARX 36

























































































































































Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды

Ammann ARX 36, Оригинальное руководство

Результаты поиска

Содержание ARX 36

Отзывы:

Похожие инструкции для ARX 36

Бренды по названию

Популярные бренды