107
that are a long way away from the unit. The Green LED box helps
to locate the center of the Red LED beam when the Centering box
below is checked. Once the Green LED beam turns off, the bar
code will be scanned.
LED Power
Adjust the intensity of the LED light (in percent, 100 = 100%). In
brightly lit areas the LED light may not be necessary. Reducing the
amount of LED light can increase battery life.
Red LED Light
Checked*
Enable the Red LED illumination light.
Unchecked
Disable the Red LED illumination light.
Centering
Checked
Allows the unit to look for the bar code to be scanned in the
middle of the Red LED illumination beam only.
Unchecked*
Disable the Red LED illumination light.
Image Contrast
Determines the normal contrast for the Matrix bar code image that
is being scanned. If the bar code image is typically light, a setting
of 2 would be best. If the bar code image is typically dark, then a
setting of 6 would be best.
Bar Code Edit Options
The “Barcode Edit Options” allows data editing (modification) before transmission.
Enable Bar Code Edit
Check-box must be checked for any of the editing options below to be valid.
ON:
Enable Data Editing.
OFF*: Disable Data Editing.
