26
3.
Adjust the lower speed
You can adjust the lower speed of the lift if needing: turn the throttle valve clockwise to
decrease the lower speed, counterclockwise to increase the lower speed.
(See Fig. 35)
4. Test with load
After finishing the above adjustment, test running the lift with load. Run the lift in
low position for several times first, make sure the lift can rise and lower
synchronously, the Safety Device can lock and release synchronously. And then test
run the lift to the top completely. If there is anything improper, repeat the above
adjustment.
NOTE: It may be vibrated when lifting at start, please lifting it with load for several
times, the air would be bled and the vibration would be disappeared automatically.
Hydraulic Schematic Diagram
Fig.35
Throttle valve
Clockwise to decrease the
lower speed.
Counterclockwise
to increase the lower speed.
Throttle valve
Fig. 36
Содержание BP-10
