1-69
S-104-100
Revised 09/2004
e-mail: [email protected]; [email protected]; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
CLAMPING
Adjustment of the Safety Latch
1. Turn the left hand crank. As the machine reaches home position and the clamps disengage, safety latch
A
should fit into notch located on clamp tip
B
. To adjust, loosen screws
C
and slide bracket
E
backward
or forward as necessary in order to position safety latch
A
to fit into notch. Once the adjustment has been
made, re-tighten screws
C
.
2. A minimum clearance of 0.79 mm (.031”) is required between toggle lever and clamp arm tip. To
adjust, loosen screws
C
and turn eccentric nut
D
as necessary. Once the adjustment has been made, re-
tighten screws
C
.